EMG ACS SOUNDHOLE PICKUP User Manual

General Operation
The EMG-ACS is a full bandwidth pickup. For best performance it should be played through a full bandwidth system using a direct box with the
signal sent directly to the mixing board. If you use an amplifier on stage it should be full bandwidth. Results from amplifiers “tuned” for piezo
style pickups will yield poor results. Since the ACS is a magnetic pickup, you might find the best result is a simple guitar amplifier designed for
magnetic pickups. The ACS also features a volume control.
Installation notes:
This is a very simple installation. Connectors are used throughout so soldering is not required. Once the installation is complete the EMG-ACS
can be removed and reinstalled easily. Velcro is used to attach the pickup cable out of sight when the pickup is removed.
0230-0254A
Dimensions:
ACS Soundhole Pickup
Warranty
All EMG Pickups and accessories are warranted for a period of two years. This warranty does not cover failure due to improper installation, abuse or damage. If
upon examination the pickup is determined to be defective, a replacement will be made. Warranty replacement products are covered by this same warranty. This
warranty covers only those pickups and accessories sold by authorized EMG Dealers. This warranty is not transferable.
© 2012 Copyright EMG INC. All Rights Reserved.
PO BOX 4394
SANTA ROSA, CA
95402 USA
P (707) 525-9941
F (707) 575-7046
EMGPICKUPS.COM
String choices/ Pole pieces:
The EMG-ACS features adjustable pole pieces to compensate for different choices of strings. Typically a wound G String will have a smaller core
than the B String, so the unwound B and E strings will be louder. The Pole pieces can be lowered for better string balance or they can be
removed entirely.
.175
1.200
3.280
1.015
3.515
SPECIFICATIONS
Resonant Frequency 14KHz
Output Noise -96dbV
Output Impedance (Ohms) 2K
Output Voltage 0.5V
Current Requirement @ 6 Volts (Microamps) 220
Maximum Supply (Volts DC) 27
INSTALLATION INFORMATION
EMG MODEL: ACS SOUNDHOLE PICKUP
tools required:
Electric Drill
31/64” Brad Point Drill
1/2” Ream
1/16” , 3/32” Hex Wrenches (Included)
(89.3)
(30.5)
(83.3)
(4.44)
(25.7)

EMG ACS SOUNDHOLE PICKUP Specifications

General

Brand	EMG
Model	ACS
Output	Active
Compatibility	Acoustic guitars
String Configuration	6-string
Magnet Type	Ceramic
Color	Black
Type	Pickup

Summary

EMG ACS Soundhole Pickup Installation

Specifications

Technical details of the EMG ACS soundhole pickup, including frequency, noise, impedance, and voltage.

Tools Required

Lists the necessary tools for installing the EMG ACS pickup, such as drills and hex wrenches.

Installation Notes

Provides general notes on the simple installation process, highlighting solderless connectors and removability.

General Operation

Explains how to achieve best performance, recommending full bandwidth systems and amplifiers for magnetic pickups.

String Choices and Pole Pieces

Details how to adjust the ACS's pole pieces to compensate for different string types and achieve better balance.

Dimensions

Provides the physical dimensions of the EMG ACS soundhole pickup for fitting purposes.

Warranty Information

Outlines the two-year warranty, conditions, and limitations for EMG Pickups and accessories.

Output Jack Installation

Battery Board Installation

Instructions for installing the battery board, including battery orientation and connecting cables to the board.

Velcro Coin Installation

Explains how to install the Velcro coin for convenient cable management of the pickup cable.

Cable Holder and Pickup Installation

Final Steps and Testing

Covers restringing, testing the pickup with an amplifier, and final pole piece adjustments for optimal sound.