Emheater EM15-SP Series

Need help?

Do you have a question about the Emheater EM15-SP Series and is the answer not in the manual?

Summary

Preface

First-time Use

Guidance for new users on careful manual reading and contacting support.

Safety Information and Precautions

Safety Information

Detailed safety guidelines and warnings for operating the inverter safely.

Product Information

Designation Rules

Explains the naming convention for EM15-SP series solar inverters.

Model and Technical Data

Provides detailed specifications and model variations for the EM15-SP series.

Product Appearance and Installation Dimensions

Details the physical appearance and dimensional specifications of the inverter.

Installation of Frequency Inverter

Installation Environment

Specifies the recommended environmental conditions for installing the inverter.

Installation Direction and Space

Provides guidelines on inverter orientation and required clearance for ventilation.

Main Circuit Terminals Description

Details the functions and connections of the main circuit terminals.

Control Circuit Terminals Description

Explains the layout and function of control circuit terminals.

Motor Connection Diagrams

Illustrates connection diagrams for various motor configurations.

Water-Level Control Wiring

Details wiring methods for water-level automatic control using float switches.

Operation and Display

Operating Panel Instructions

Explains the functions of the LED display, indicators, encoder knob, and operation keys.

Function Code Table

Details various function codes, parameters, and their descriptions for configuration.

Motor Parameters

Configuration settings related to the connected motor's electrical characteristics.

Vector Control Parameters

Configuration settings for advanced vector control operation of the inverter.

V;F Control Parameters

Configuration settings for the Voltage/Frequency control method.

Control Optimization Parameters

Parameters for optimizing inverter performance and control.

Standard Monitoring Parameters

Parameters for monitoring the inverter's operational status and values.

System Parameters

Basic system settings including password, software version, and default restore.

Control Optimization Parameters 2

Additional parameters for fine-tuning inverter control and optimization.

Fault Diagnosis and Solution

Fault Alarms and Countermeasures

Lists common fault codes, their causes, and recommended solutions for troubleshooting.

Modbus Communication Protocol

Protocol Overview and Data Structure

Explains Modbus protocol, frames, RTU format, and data structure for communication.

Application Methods and Bus Structure

Describes network connection, topology, and application methods for Modbus.

Control, Parameters, and Faults

Covers commands, status, parameters, fault codes, CRC checking, and communication settings.

Warranty Information

Warranty Agreement

Outlines the terms and conditions of the product's warranty coverage.

Product Certification

Certification Details

Provides information on product testing and compliance with quality standards.