2.0 Using the Bit torrent module of the
EM7080
The EM7080 has a so called Bit torrent module. Using this module, you are able to
download al sorts of media files to the hard disk of the EM7080. Use the following
steps to setup the Bit torrent module for usage.
2.1 Setting up your router (EM4551) for the Bit torrent
module
If you are using a router in your network, you need to open a port in your router’s
firewall before you can use the Bit torrent module. Because there are many brands
and types of routers, we will explain how you can open a port in the firewall of the
Eminent EM4551 wireless N-router. These steps can be used as a guideline for other
routers.
1. Make sure you know your media player’s IP-address.
2. Make sure your computer is completely started and open your computer’s web
browser.
3. Fill in the following in the web browser’s address bar:
http://192.168.8.1
4. Fill in ‘admin’ at ‘username’.
5. Fill in ’admin’ at ‘password’.
6. Login in to the router’s main menu.
7. Click ‘Setup Tool’.
8. Click “Advanced Setup’.
9. Click ‘NAT/Routing’.
10. Click ‘Port Forwarding’.
11. Make sure the ‘Rule Type’ is set to ‘User Defined’.
12. Fill in ‘Bittorrent’ at ‘Rule Name’.
13. At ‘LAN IP Address’ you have to fill in the media player’s IP-address.
14. Select ‘TCP’ at ‘Protocol’.
15. Fill in ‘6881~6881’ at ‘External Port’.
16. Fill in ‘6881~6881’ at ‘Internal Port’.
17. Click ‘Add’. If correct, the new rule will displayed at the lower part of the screen.
18. Make sure the name of the rule is marked, and click ‘Run’ to activate this rule.
Your router has now been configured for using the Bit torrent module.
2.2 Using the Bit torrent module
1. Fill in the media player’s IP-address on the address bar. For example:
http://IPAddress and press the ‘Enter’ key on your keyboard.
2. The bit torrent module will automatically be shown on screen.
3. Wait until the screen is completely loaded.
4. Click ‘Bittorrent download’.
5. Click ‘+ Add new torrent’.
To Next Page
Loading...
