How to use the Carrycot
English
Engaging the Parking Device
• Engage the parking device by pushing down with your foot.
• Disengage the parking device by pulling up.
WARNING
• Don’t let any child be placed in the vehicle when it is being folded/
unfolded
Attachment of the carry-cot
• Engage the parking device: Lift the carrycot by handles and push
the Easy Fix into the attachments (5) on both sides of the chassis
until it locks into its position.
WARNING
• Make sure that the top part is in locked position on both sides.
Adjust the hood
• Adjust the hood by gently pulling the hood forward into desired
position.
Do not adjust the hood while the apron is attached.
IMPORTANT
• Never carry the carrycot by the hood.
• Never lift the carrycot when it is assembled onto the chassis.
• Press the hood fabric onto the plastic holder (1), on each side. Press
the velcro (2) onto the pram body.
• The press studs on the back of the hood is to use when roll up the
hood for better ventilation when it is hot.
• Press the apron onto the hood (3) and onto the plastic holder (4) on
each side.
IMPORTANT
• The hood cannot unfold when the apron is snapped onto the hood
without releasing the press studs (4)
To Next Page
