Emmaljunga NXT 2in1 - Page 43

43
NXT 2in1 v1.0
Delivery Check
NXT 2in1
Check that all rivets, screws and nuts are securely fastened.
Check that all press studs and zips on the seat fabrics and the tray/basket are cor-
rectly and securely attached.
Make sure that there are no other visible dierences on the chassis, seat fabrics, tray/
basket and wheels.
1.Checkthatthefollowingitemsarepresentinthecorrectnumbers:
2. Check the functions of the chassis/seat unit/Pram Body
3. Wheels and brakes
4. Overall inspection of the product
1 pc Pram body
1 pc Apron for Pram body
1 pc Seat unit fabric
1 pc Hood
1 pc Matress
1 pc Bumper bar
Lubricate the ends of the axles.
Attach the wheels and make sure that the wheels lock into position.
Check that the parking device locks both rear wheels when engaged.
EN
Unfold the chassis.
Check the function of the chassis , that the two locking clips lock properly on both
sides.
Check that the seat/Pram Body click on the chassis and it locks on both sides.
Check the 5 point safety harness on the seat unit by checking that it locks into place.
Check the telescopic height adjustment by lifting/pulling the handle up and down, the
handlebars should be checked that they lock in each position.
Check that the back rest can be adjusted and locked into each position.
Check that the footrest on the seat unit can be adjusted and locked into each position.
NXT 2in1
EN