EasyManua.ls Logo

Emmaljunga Sento MAX - Routine Inspection

Emmaljunga Sento MAX
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
Sento MAX, Sento LUX V 1.1
salted roads, spray the chassis with a
hose, and dry.
Be careful during transportation and
storage as the surface of the chassis
is fragile. Scratches that arise after the
sale are not a justiable complaint.
2) Routine inspection
Regularly clean the chassis and
metal parts of the vehicle, dry off
and lubricate thereafter all joints.
WARNING! Do not lubricate the
telescopic bar. Spokes and rims on all
wheels should frequently be washed
in hot water and wiped off with a dry
cloth. When the pram is used during
the winter time, cleaning of the pram
should be done at least once a week.
Lack of maintenance could cause rust.
Clean the shafts (clean axles with a
cloth).
Air Wheels: ( some models)
If you need to inate the tyre, use an
air pump with an adapter for a car.
For air pressure see marking on the
tyre.Please neglect possible travel
direction marks on the tires.
The tyres are assembled in the factory.
Any balancing problems can be easily
adjusted by releasing the air and
setting the tyres correctly on the rim
and inating to the correct pressure.
With ozone and UV radiation the tyres
may have small cracks. It does not
affect handling and safety, and is not a
complaint basis.
Important information leatherette
Never use disinfectant liquid or Hand
Sanitiser gel on the Leatherette
handle bar as it may cause permanent
stains and damage to the Leatherette
surface.
Make sure Leatherette is kept clean
by washing with mild soap and
water. Always dry your hands after
disinfecting or sanitising before
touching the handle bar.
Never use Velcro straps (eg changing
bags, organisers) on Leatherette
handle bars as this can damage the
surface.
WARNING
Tyres can when in contact with PVC-
ooring or other plastic materials
cause discoloration. Always use wheel
protection if the pram/stroller is stored on
delicate surfaces.
Check that:
all chassis locking devices, seat unit
and carrycot are functioning properly.
all rivets, nuts and bolts are rmly
tightened and not broken.
all plastic parts are not cracked or
broken.
the wheel bearings are in a good
condition.
all zips and velcro straps are securely
fastened.
all elastic straps are in a good
condition.
the brake works.
the tyre air pressure is correct (see
marking on tyre).
check regularly for damage to the
chassis, carrycot and seat unit.
PLEASE NOTE
When in need of servicing with
original parts and other technical
issues that require a professional
evaluation, Always get in touch with
the store where you purchased your
product.
The product you have chosen follows
the guarantee regulations.
The parking brake consists of
moving parts and requires regular
maintenance to function correctly.
To ensure effective functioning always
make sure that the parking brake is
well lubricated.
Immediately remove sand, snow, ice
and dirt from any moving part of the
braking system.
Use a silicon or oil based lubricant to
lubricate the brake pedal, wheel axle
and brake pins on both sides of the
pram brake at least once a month.

Table of Contents

Related product manuals