Assembly and usage of the chassis
Engaging the parking device
• Engage the parking device by pushing it down with your foot.
• Disengage the parking device by pulling up
WARNING!
• Never leave the vehicle without rst engaging the parking device.
• The brake should always be engaged when you lift your child in
and out of the stroller/pram.
• Avoid uphill or downhill parking.
• Make sure that the cogs are attached properly on both back
wheels.
• Make sure that the brake pin engages into the cogs when the ve-
hicle is parked.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• When folding: Make sure the Adjustable Comfort System is set in
the highest position to avoid pressure marks on the rear wheels
while the chassis is in the folded position.
• Ensure the front wheels ar in the swivel position by pulling the lock-
ing ring up.
• Fold the chassis by rst pressing in the buttons (5) at the same time
and pull the two main locking devices, one on each side upwards
(6).
• Lift the secondary locking device (7) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap’s release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
• The tray is already tted on delivery but it can be removed for
washing. Remove the wooden plate before washing.
How to adjust the height of the handle
• Adjust the height by pressing the grey buttons on the inside of the
handle (8). Keep the buttons pressed in while you adjust to the
required position (9)
• Attach the shopping tray to the chassis according to the included
instruction.
To Next Page
Loading...
