Emmaljunga Toddler Roller NXT 90 - Attaching the Toddler Roller to the Chassis; Suspending the Toddler Roller When Not In Use

16
Manual Toddler Roller NXT90 v. 1.1
4
3
4
5
2
• This is how the Toddler Roller should look when suspended.
WARNING!
• Remember strangulation hazard! Always remove the attachment strap
when not in use and store it a safe place
• Never allow children to play with the attachment strap.
Wichtige SicherheitshinweiseAssembly and use of the Toddler Roller
1 stk 5/8 Nøgle
• Engage the pram brake
• Open the brackets on the Toddler Roller and hook the roller onto
the metal bar on the chassis.
WARNING!
• When you attach or remove the toddler roller, make sure the child is
not on the toddler roller.
• Fasten both locks down.
WARNING!
• This step is very important to ensure that the Toddler Roller is se-
curely attached to the pram.
• Always check that the Toddler Roller is correctly attached before
use.
Removing the Toddler Roller from the Adaptor
• Open the brackets on the toddler roller and remove it from the
chassis.
Suspending the Toddler Roller, when not in use, ‘on the go’
• Attach the strap around the handlebar above the handle height ad-
juster by placing the strap around the handle and pulling it through
the belt loop ...
…and attach the plastic part at the end of the strap to the side of the
Toddler Roller board.