Emmaljunge Go Double Adapter - Attaching and Using Go Double Adaptor; Attaching Go Double to the Chassis

48
Go Double Adapter Super Viking 2.1
4
5
1
2
3
“Klick”
Attaching and using Go Double Adaptor
Attaching Go Double to the chassis
• Unfold the chassis
• The setting of the Emmaljunga Comfort System must be in the middle
position, otherwise Go Double will not t to the chassis.
• Remove the cover from the top of the front wheel assembly with a
small screwdriver. Save the cover for future use.
• Don´t let children play with the cover.
• Click in the Go Double Adaptor on the chassis
• and check that the front support on Go Double is positioned over the
top of the front wheel assembly on the chassis.
WARNING
• Always make sure that Go Double is correctly attached to the chassis
prior to use.
• Repeat step 1-3 with the other Go Double on the other side of the
chassis.