English
Attaching and using Go Double Adaptor
Using with two seat units
WARNING
• Note that the pram’s stability is immediately affected if you change
the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots,
car seats or place children in/remove children from the pram.
• Attach the rst seat unit to Go Double
• Position the seat unit’s footrest in the shopping tray
• Attach the second seat unit to Go Double
• Correctly attached seat units
• Maximum load for each seat unit: 15 kg.
WARNING
• Never attach the seat units in any way other than as shown in the
picture.
• The most reclined position on the seat unit shall only be used for
storage.
Using with two carrycots
WARNING
• Note that the pram’s stability is immediately affected if you change
the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots,
car seats or place children in/remove children from the pram.
• Attach the rst carrycot to Go Double
To Next Page
Loading...