• Correctly attached carrycots
• Maximum load for each carrycot: 9 kg.
WARNING
• Never attach the carrycots in any way other way than as shown in the
picture.
Using with two car seats
WARNING
• Note that the pram’s stability is immediately affected if you change
the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots,
car seats or place children in/remove children from the pram.
• Use one First Class
0+Base
adaptor ..
• and one First Class
0+Base
Go Double Adaptor
• Attach the First Class
0+Base
adaptor to the front/lower position.
Attaching and using Go Double Adaptor
• Attach the second carrycot to Go Double
To Next Page
Loading...