English
• Attach the First Class
0+Base
Go Double adaptor to the back/top
position.
WARNING
• Note, the adaptors shall not be used in any other way.
• Attach the car seat to the rst adaptor in the lower position.
• Attach the car seat to the second adaptor in the higher position.
• Correctly attached car seats + adaptors.
• Maximum load for each car seat: 13 kg.
WARNING
• Never attach the car seats + car seat adaptors in any other way than
as shown in the picture
Using with one seat unit and one carrycot
WARNING
• Note that the pram’s stability is immediately affected if you change
the weight distribution on the Go Double. Be aware that the risk of
tipping increases as soon as you attach/remove seat units, carrycots,
car seats or place children in/remove children from the pram.
• Attach the seat unit to the front/lower position
Attaching and using Go Double Adaptor
To Next Page
Loading...