The battery pack has security features for protection. To
unlock the battery, first, ensure the bike is turned off.
Secondly, with your key, open a secondary lock located on
the floor of the bike. Lastly, pull the battery straight up
with both handles and rest it on the side of the bike. You
will see a wire plugged into the battery. Gently pull it off
and take the battery indoors.
Once indoors, plug the charger into the
battery-side first. This side must be firmly
pushed in all the way. After, plug the
charger into the wall.
Make sure to plug the charger into the battery first, then
into the wall. Also, Unplug the battery first and then,
unplug the wall outlet.
When it is plugged in, the charger will show a red light while charging. After the battery is fully
charged, the charger signal will turn green and cut down the power. Do not worry about over charge.
When fully charged, unplug the battery-side plug first then, unplug the wall outlet.
B. Outdoor Charging
There is also a plug on the bike itself for charging outdoors. They are
located in front of the seat as shown in the picture. As explained above
for indoor charging, you must plug the charger to the bike securely
first, then plug the charger to the wall.
To Next Page
Loading...
