EMMO Hornet - Handlebar Controls - Right Side; High;Low Beam Switch; Turning Signals

16 | P a g e
High/Low Beam Switch
Pushing the switch up activates the high beams for the front
headlights, pushing it down deactivate the high beams
(make sure the light switch is on first).
Flicking the button downwards causes the passing signals to
flicker.
Turning Signals
Pushing the switch to either the left or
right positions will turn on the
respective front/rear turning signals.
Pushing the switch back to the centre
position will turn off your turning
signals.
Horn
Pushing this button sounds the
horn.