◆Display Interface
After switching on the E-bike system, the display shows current speed and total
distance except, battery indicator and assistance level
◆To change the indicated information, press the MODE button to show in turn as
follows: Current Speed (Km/h) → Trip Distance (Km) Trip Time (Hour) → Max.
Speed (Km/h) → Avg. Speed (Km/h) → Motor-output (W) →Current Speed (Km/h).
◆Switching PAS Off: There is a preset setting which allows your bike to cruise at a
steady speed of 3.7 MPH (6Km/h), the letter "P" is shown at the screen. To engage this
cruise control feature press and hold the "-" button for a few seconds until the letter "P"
shows on the screen. To disengage this function press the brakes.
Pedal Assist Mode Control LCD
Please read the following steps and images to help you understand
how to read and operate all the functions.
M
LCD
M
12
To Next Page
Loading...
