P
o
w
er
S
hut
Off
Troubleshooting
If your
E
M
OJO
Lynx experiences a sudden power shut off while in use, this can be related to several reasons but the problem has an easy fix.
Quick Disconnect (front fork right side)
PROBLEM
The LED module on the handlebar starts to blink repeatedly
followed by a power shut off. (Make sure the battery is not
depleated)
DIAGNOSTIC
1- Check the battery directly, press he power button to
check how much power is left.
a) ) Dis
onnect the brake handle sensors from the controller box, turn the LED display at the handlebar, if
it continues to blink reconnect the wires
and move to the next step.
b) Disconnect the throttle sensor from the controller box, turn the LED display at the handlebar, if
it continues to blink reconnect the wires and
move to the next step.
c) ) Di
connect the speed sensor from the controller box, turn the LED display at the handlebar, if
it continues to blink there could be a problem with
the controller box and would need to be replaced.
2-Open the controller box under the bike ( Fig 1), retrieve the controller and check all wiring connections ( Fig 2):
F
ig
.
1
F
i
g
.
2
3-Check the power quick disconnect plug on the right side of the front fork.
20
To Next Page
Loading...
