Emos H4051 - Page 13

Installing the camera on the ceiling: g. 2a/2b
1. Place the enclosed mount onto a clean surface.
2. Install it using the enclosed screws.
3. Install the camera onto the mount.
Installing the camera onto an uneven surface:
g. 3
Attach the adhesive tape onto the underside of the mount.
Place the camera with the mount onto the chosen spot.
Attaching protective tape: g. 4
If needed, you can attach the enclosed protective tape onto
the edge of the camera to protect it from damage.
Installing the EMOS GoSmart app: g. 5
The app is available for Android and iOS on Google play and
App Store.
Download the application by scanning the corresponding
QR code.
Router setting: g. 6
The camera only supports 2.4 GHz Wi (not 5 GHz).
EMOS GoSmart mobile app:
Fig. 5a
Open EMOS GoSmart and conrm the privacy policy by
tapping agree.
Fig. 5b
Choose sign up.
Fig. 5c
Enter a valid e-mail address and choose a password.
Conrm the privacy policy by tapping agree.
Choose log in.
Fig. 6a
Choose add device.
Fig. 6b
Choose the corresponding product category.