2
CHYBÍ v CZ
GB | Universal Antenna
Safety Instructions and Warnings
The product is designed to serve reliably for many years if used properly.
• Read the user manual thoroughly before use.
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
• Do not place any open ame sources on the product, e.g. a lit candle, etc.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning agents – they could
scratch the plastic parts and cause corrosion of the electric circuits.
• In the event of damage or defect of the product, do not perform any repairs by yourself. Have it repaired by
the retailer you bought it from.
• This device is not intended for use by persons (including children) whose physical, sensory or mental dis-
ability or whose lack of experience or knowledge prevents them from using it safely. Such persons should
be instructed in how to use the device and should be supervised by a person responsible for their safety.
Package Contents
Antenna
Antenna mount/stand
Power supply
Coaxial cable
Device Description
Digital active DVB-T/T2 antenna for indoor and outdoor use with low-noise amplier.
Installation
• When installing the antenna, use a mount or stand depending on the intended use (g. 1–4).
• Connect the coaxial cable to the antenna.
• Connect the coaxial cable to the voltage divider.
• Plug the power supply connector into the voltage divider‘s socket (g. 6).
• Plug the voltage divider connector to the TV receiver or set-top box.
• Connect the power supply to a 230 V power socket (g. 6).
• The antenna can also be powered from the TV or set-top box if the device supports this feature (g. 5).
1 2
3
4
5
6
To Next Page
Loading...
