3
GB | Power Surge Protector
Power and telecommunication networks are constantly exposed to the risks of interference and
power surges of various kinds, which often cause failures and malfunctions of various electronic devices.
To eciently protect your expensive electronic devices from damage or destruction, use the specially
developed device which provides safety and functional reliability.
Connect the surge protector
1. Plug the power cord into a properly grounded outlet.
2. Plug the component power cord into the surge protector.
Protection indicator: alerts you on the operating status of the surge protector.
Warning
• The device must be plugged into sockets solely with a safety pin (grounding)!
• The device should be used in electrical installations with an easily identiable neutral/phase
conductor.
• Do not use the device when supplying fridges, heaters and other devices that can result in exceeding
the rated current of the device.
• Device should be used in dry indoor premises only.
• It is forbidden to open and repair the device without permission.
• Opening the cover is considered breach of guarantee.
• Repairs are carried out by device manufacturer only.
Guarantee terms and conditions
1. This guarantee provides quality and correct operation of the device.
2. The guarantee is provided for 24 months from the purchase date.
3. Faults or malfunctions found within the guarantee period will be removed within 1 month from
the date of notication.
4. The guarantee does not cover damage caused by improper handling, storage or caused by natural
disasters and other circumstances.
The guarantee does not cover fuses, varistors and mechanical damage.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local
authorities for information about collection points. If the electronic devices would be disposed
in landll, dangerous substances may reach groundwater and subsequently food chain, where
it could aect human health.
DE | Überspannungsschutz
Energie- und Telekommunikationsnetze werden ständig den Risiken von verschiedenartigen
Störungen und Überspannungen ausgesetzt, oft in Folge von Störungen und schlechter Funktion
elektronischer Geräte. Um einen wirksamen Schutz teurer elektronischer Geräte vor Beschädigung
oder Zerstörung sicherzustellen, verwenden Sie ein speziell entwickeltes Gerät, welches für Sicherheit
und eine zuverlässige Funktion sorgt.
Anschluss des Überspannungsschutzes
1. Das Netzkabel an eine ordnungsgemäß geerdete Steckdose anschließen.
2. Die Versorgungskabel einzelner Komponenten direkt an den Überspannungsschutz anschließen.
Schutzanzeige: Macht Sie auf den Betriebsmodus des Überspannungsschutzes aufmerksam.