EasyManua.ls Logo

Emos P5552 - Safety Warnings; Technické Parametry

Emos P5552
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Tapping the tab on the socket‘s home page navigates to an overview of power consumption. Power consumption is saved
per day at the bottom of the screen.
Setting the Socket‘s LED Indication
The Smart socket‘s LED indication can be set to 4modes.
These are:
1. LED indicates ON/OFF – If the socket is on -> the LED indicator is on. If the socket is o -> the LED indicator is o.
2. LED indicates ON/OFF in reverse – If the socket is on -> the LED indicator is o. If the socket is o -> the LED indicator is on.
3. LED indicator o – The indicator is o regardless of whether the socket is on or o.
4. LED indicator on – The indicator is on regardless of whether the socket is on or o.
These modes can be set in the socket‘s Settings tab. The tab can be found in EMOS GoSmart at the bottom of the socket‘s
home page (see Fig. 16).
Safety Warnings
Do not interfere with the structure of the socket.
Do not use the socket if damaged.
Do not interconnect two or more sockets.
Only plug rubber cables with an IP44 plug into the socket.
Do not exceed the socket‘s maximum permitted load.
Incorrect use may cause risk of re or injury by electric current.
Pay attention to the data on the type of label of the appliances connected to the device. Maximum input power of con-
nected electrical appliances must not exceed 3,680 W (max. current 16 A). Max. inductive load: 2.5 A.
This appliance is not intended for use by persons (including children) whose physical, sensory or mental disability or lack
of experience and expertise prevents safe use, unless they are supervised or instructed in the use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
Any use of the device not listed in the previous sections of the manual will result in damage to the product and could
present danger in the form of a short circuit, injury by electric current, etc. The device must not be modied or otherwise
restructured! Safety warnings must be followed unconditionally.
Hereby, EMOS spol. s r. o. declares that the radio equipment type P5552 is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following internet address: http://www.emos.eu/download.
Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for in-
formation about collection points. If the electronic devices would be disposed on landll, dangerous substances may
reach groundwater and subsequently food chain, where it could aect human health.
CZ | Smart zásuvka, IP44
Popis produktu (viz obr. 1)
1. Zásuvka
2. On/O vypínač/párovací tlačítko
Technické parametry
Napětí: 250 V~/50 Hz
Maximální zatížení: 16 (2,5) A, ∑ 3 680 W
Frekvence Wi-Fi: 2,4 GHz
Wi-Fi standard: IEEE 802.11 b/g/n
Krytí: IP44
Bezpečnostní mechanismy: OPEN/WEP/WPA-PSK/WPA2-PSK
Ovládání: Wi-Fi, Bluetooth
Funkce
Možnost manuálního nebo automatického ovládání
Funkce časovače
Funkce odpočítávání
Funkce cirkulace
Funkce náhodného režimu
Funkce odloženého vypnutí
Funkce Východ/Západ
Měřič spotřeby
Indikace stavu zásuvky
Propojení zásuvky s mobilním telefonem
1. Pro připojení vaší Smart zásuvky k mobilnímu telefonu budete potřebovat aplikaci EMOS GoSmart, kterou stáhnete
zvašeho Google play (Android) nebo App Store (iOS) (viz obr.2).
2. Zásuvka podporuje pouze 2,4 GHz Wi (nepodporuje 5 GHz) (viz obr. 3).
3. Otevřete aplikaci EMOS GoSmart a potvrďte zásady ochrany osobních údajů a klikněte na souhlasím (viz obr. 4).