Emos P5601UF - Technical Specifications

6
GB | Floor Heating Thermostat
The P5601UF thermostat is designed for controlling underoor heating.
Important
• Read the thermostat manual carefully before using the device for
the rst time.
• Turn o power before installing the thermostat!
• Installation and power connection of the thermostat may only be done
by a qualied person.
• Follow prescribed standards during installation.
Technical specications:
Switched load: max. 230 V AC; 16 A for resistive load; 16 A for inductive
load
Temperature measurement: 0°C to 99°C, 0.1°C resolution
Temperature setting: 5°C to 95°C, in 0.5°C increments
Temperature dierential setting: 1°C to 10°C, in 1°C increments
Power supply: 230 V
Enclosure rating: IP20
Accessories: thermostat, oor sensor 3 m
Dimensions and weight: 43 × 86 × 90 mm; 211 g (see g. 2)
Description of Control Elements and Screen (See Fig. 1)
1 –
manual mode,
automatic mode
2 – 6 time slots
3 – time/set temperature
4 – day of the week
5 – mode
6 – UP button
7 – DOWN button
8 – internal room sensor
9 – on/o button
10 – heating mode
11 – button lock
12 – room temperature
13 – low temperature protection
mode
14 – programme mode