Emos P5606OT - Holiday Mode; Anti-Freeze Mode; Time and Date Setting; Calibration of Room Temperature

7
Holiday Mode
Holiday mode saves power by allowing you to decrease temperature for
1 to 99 days when you are away from home.
1. Move the slider to AUTO.
2. Press the H button to activate Holiday mode.
3. Use + or - to set the number of days you will be away.
4. Then press the button to set the temperature and conrm by
pressing
.
This mode will be active until the set number of days elapses or can be
cancelled manually by pressing
.
Anti-Freeze Mode (OFF)
1. Move the slider to the OFF position; temperature will now be set
to a constant 5 °C.
2. You can cancel anti-freeze mode by moving the slider to AUTO.
Time and Date Setting
1. Move the slider to TIME/DATE; the eld for date setting will start
ashing on the display.
2. Press ; the month eld with start ashing on the display.
3. Press ; the year eld with start ashing on the display.
4. Press ; the hour eld with start ashing on the display.
5. Press ; the minute eld with start ashing on the display.
6. Press
to conrm the settings or wait 15 seconds for automatic
conrmation.
Calibration of Room Temperature
Move the slider to the OFF position and press H and at the same
time to enter settings for calibration of room temperature; CAL will
appear on the display. Press + or - to adjust the value (-3.0 °C to 3.0 °C,
in 0.5 °C increments).
Press
to conrm the settings or wait 15 seconds for automatic
conrmation.
Calibration of room temperature is used for example if the thermostat
shows 21 °C but you want it to show 20 °C. In that case, the calibration
value should be set to -1 °C.
Temperature Dierential Setting
Move the slider to the OFF position and press H and at the same time to
enter settings. Then press the button to go to Temperature Dierential
Settings; „diFF“ will appear on the display. Press + or - to adjust the value
(0.2 °C to 2.0 °C, in 0.1 °C increments).
Press
to conrm the settings or wait 15 seconds for automatic
conrmation.