Emos P5732 - GB | Wireless Doorchime; Specifications; Chime Description; Button Description

3
GB | Wireless Doorchime
The set consists of a doorbell button (transmitter) and a chime (receiver). The
chime is powered by 3× 1.5 V AAA batteries. Transmission between the button
and the chime is carries via radio waves at a frequency of 433.92 MHz. The
range depends on local conditions and reaches up to 100 m in open spaces
without interference. The set has a so-called self-learning function – the button
is able to generate its own pairing code which is then received by the chime and
stored in its memory. The set can thus be expanded with additional buttons.
The self-learning function also prevents the set from aecting neighbouring
doorbells. For proper usage of the wireless doorbell, read the instruction
manual thoroughly.
Specications
Transmission range: up to 100 m in an open area (can drop down to up to
one fth in a busy area)
Transmission frequency: 433.92 MHz, 10 mW e.r.p. max.
Button: water resistant; enclosure rating IP44
Pairing the chime with buttons: self-learning function
Pairing capacity: maximum of 8 buttons (spare button P5732T)
Number of ringtones: 38
Chime power supply: 3× 1.5 V (type AAA) batteries, 5 V/500 mA micro USB port
Button power supply: 1× 3 V battery (type CR2032)
Includes: double-sided adhesive tape
Chime Description
See g. 1
1 – Ringtone change button
2 – Volume setting button
3 – Micro USB port for powering with 5 V/500 mA
4 – Bell LED
5 – Hanging hole
6 – Battery compartment
Button Description
See g. 2
1 – ring button and LED
2 – battery compartment/mounting pad
3 – hole for opening the battery cover
4 – battery
Installing the Button/Removing the Mounting Pad
See g. 3
1 – Mounting pad
2 – Holes for screws