To Next PageTo Next Page
Need help?Do you have a question about the Emos VT-320 and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Square Wave Generator | No |
| Battery Test | Yes |
| Display | LCD |
| Data Hold | Yes |
| Backlight | No |
| DC Current Range | 200µA - 10A |
Explains common electrical symbols used in the manual and on the device.
Lists technical parameters like measurement range, temperature, power supply, and dimensions.
Details the components of the tester, referencing figure 1.
Explains how to check the tester's operational status before use.
Describes how to read AC voltage values using the tester's LEDs.
Describes how to read DC voltage values using the tester's LEDs.
Explains the procedure for identifying a live phase conductor.
Details the method for determining the phase sequence in a three-phase system.
Explains how to test circuit continuity using the R button and buzzer.
Lists critical safety precautions and operational limits for the tester.
Instructions on how to clean the tester safely and effectively.
Explains common electrical symbols used in the manual and on the device.
Lists technical parameters like measurement range, temperature, power supply, and dimensions.
Details the components of the tester, referencing figure 1.
Instructions on how to file a warranty claim or report a defect.
