Saline Solution
Each headset is packed with a small bottle of multipurpose contact lens solution. When
this is exhausted, you can purchase from your local drug store or pharmacy. We
recommend the use of contact lens solution if possible; but please do not use contact
cleaning or sterilizing solutions. Multi-purpose solution contains non-allergenic anti-
microbial agents which helps to keep your sensors fresh and prevent transfer of microbes
between users.
A saline solution between 0.7% - 4% w-w sodium chloride can also be used, but we
recommend adding a small quantity (< 4% by volume) of a household disinfectant such as
70% iso-propyl alcohol.
To reduce the rate of evaporation, add a couple of glycerin drops.
To Next Page
Loading...
