Emotiva Airmotiv Series User Manual

Confirms or changes the AC line voltage setting on the subwoofer for correct operation.

Unbalanced line level audio inputs, summed internally. Connect L/R or single output.

Connect single balanced subwoofer or LFE output. Preferred for noise resistance.

Selects On (continuous) or Auto (detects audio) mode.

Indicates subwoofer status: Green for On, Red for Standby.

Adjusts the relative gain to match the subwoofer's output to main speakers.

Fine-tunes the low-frequency response, offering bass boost or cut.

Adjusts the low-pass filter crossover frequency for optimal speaker blending.

Matches the subwoofer's phase to main speakers for optimal bass integration.

Turns the main AC power to the subwoofer On and Off.

Selects the appropriate line voltage for your region to prevent damage.

Standard receptacle for connecting the AC power cable.

Compartment for replacing blown fuses with the correct value.

Details the 15" downward firing active driver and 15" front firing passive radiator.

Describes the heavily braced MDF cabinet with fabric grill and finish.

Covers amplifier type, power, protection, frequency response, and controls.

Lists dimensions, weight, and feet specifications for the S15 model.

Details the 12" downward firing active driver and 12" front firing passive radiator.

Describes the heavily braced MDF cabinet with fabric grill and finish.

Covers amplifier type, power, protection, frequency response, and controls.

Lists dimensions, weight, and feet specifications for the S12 model.

Details the 10" downward firing active driver and 10" front firing passive radiator.

Describes the heavily braced MDF cabinet with fabric grill and finish.

Covers amplifier type, power, protection, frequency response, and controls.

Lists dimensions, weight, and feet specifications for the S10 model.

Connect to AVR/pre/pro, set crossover to 150 Hz, adjust volume by ear.

Connect to stereo system, set volume low, phase 0, crossover 150 Hz.

The subwoofer requires no periodic maintenance or calibration.

Clean with a damp cloth, avoid sprays and chemicals.

Vacuum or use lint remover; avoid liquids on cones.

Covers defects in materials and workmanship for the original owner.

Provides a five-year limited warranty, transferable once within two years.

Emotiva will repair or replace the product, or offer credit/refund.

Excludes damage from misuse, unauthorized service, external causes, modifications.

Contact Emotiva for authorization, ship product with WS number.

Grants specific legal rights that may vary by state.

Emotiva not liable for shipping damage; insure your shipment.

Warranty valid in country of purchase; factory service incurs freight charges.