Need help?Do you have a question about the Emotiva BASX MC1 and is the answer not in the manual?
Details FCC compliance for radiation exposure.
Highlights key features of the BasX MC1 processor.
Explains support for Audio Return Channel and its enhanced version.
Describes managing different video capabilities across HDMI outputs.
Details the automatic room calibration system for optimal sound.
Buttons used to select inputs on the MC1.
Buttons used to select audio playback modes.
Shows current status of the MC1, including source and volume.
Toggles the MC1 between On and Standby modes.
Controls the volume and mutes audio.
Indicates the current operating status of the MC1.
Instructions on how to navigate the setup menu using front panel controls.
Connectors for subwoofers, with independent trim and distance settings.
Inputs for connecting analog stereo audio sources.
Coaxial and optical inputs for digital audio sources.
Connection for the internal Bluetooth receiver antenna.
Input for the calibrated microphone used for room correction.
Input for connecting an external IR remote control repeater or hub.
Outputs a 12 VDC signal to turn on other devices.
Port for updating the MC1's firmware via a USB stick.
Input for connecting a USB audio source like a computer.
Input for RS-232 serial remote control devices.
Analog audio outputs for connecting to amplifiers.
Outputs for connecting to TVs or projectors, supporting ARC/eARC.
Connectors for HDMI sources supporting 4k UHD, HDR, and Dolby Vision.
Port for connecting the removable power cable.
Main switch to turn AC power to the unit On and Off.
Buttons to turn the MC1 On and Off.
Controls the brightness of the front panel display.
Buttons for direct access to HDMI video and audio inputs.
Cycles through available surround sound modes.
Displays information about the current source and playback mode.
Activates the remote control’s backlight.
Mutes or unmutes the audio output.
Controls playback functions like Play, Rewind, and Fast Forward.
Selects which HDMI outputs are active.
Buttons used to navigate the Setup Menu.
Enters or exits the MC1's menu system.
Adjusts the MC1's volume from the remote control.
Temporarily adjusts volume for individual speakers.
Instructions for powering the unit on and off.
How to control volume and mute audio via front panel or remote.
Steps for choosing an input source.
How to select different audio playback modes.
Temporary adjustments to speaker levels.
Describes the VFD display and on-screen information.
Introduces the structure and navigation of the MC1's menu system.
Details on selecting sources, sound fields, trims, and EMO-Q settings.
Configure options for each input on the MC1.
Select default audio modes for various input signals.
Configure speaker layout, distances, levels, and crossovers.
Configure overall EQ settings and select EQ options.
Access various configuration options for MC1 features like startup state and volume.
Save, load, or reset configuration settings to factory defaults.
View firmware and device information, and perform software updates.
States that the BasX MC1 requires no periodic maintenance.
Instructions for gently cleaning the MC1 with a soft rag.
Lists technical details like output voltage, frequency response, and THD.
Details all video, audio, and other inputs/outputs on the MC1.
Lists supported surround sound formats, upmixers, and processing options.
Details automatic and manual room correction capabilities.
Provides power requirements, dimensions, and weight of the MC1.
Outlines the warranty coverage for defects in materials and workmanship.
Specifies the duration of the warranty and transfer conditions.
Explains Emotiva's options for repair, replacement, refund, or credit.
Lists exclusions from warranty coverage.
Provides instructions on how to claim warranty service.
Details how to ship the product for warranty claims, including WS numbers.
Explains warranty validity and service procedures for international customers.
To Next Page
General