Need help?Do you have a question about the Empava EMPV-IDC12 and is the answer not in the manual?
General| Type | Induction Cooktop |
|---|---|
| Number of Burners | 2 |
| Power | 3000W |
| Voltage | 240V |
| Control Type | Touch Control |
| Fuel Type | Electric |
| Power Levels | 9 |
| Safety Features | Child Lock, Overheat Protection |
Precautions to prevent electrical shock during installation.
Warnings about sharp edges and potential cuts during installation.
Essential safety advice to read before installing or using the appliance.
Safety precautions related to electrical shock during operation and maintenance.
Information regarding health hazards associated with the appliance.
Warnings about hot surfaces and the risk of burns.
Further details on hot surfaces and avoiding burns.
Additional warnings about sharp edges and using tools safely.
General advice for safe everyday use of the cooktop.
Guidelines for keeping children safe around the appliance.
Safety advice for cleaning and maintaining the cooktop.
Prohibitions on certain uses and materials to avoid.
Requirements for supervising children during use and maintenance.
Warnings and actions to take in case of fire during cooking.
Restrictions on usage, like avoiding steam cleaners or remote controls.
Diagram and instructions for connecting a 4-wire cable.
Diagram and instructions for connecting a 3-wire cable.
Guidelines for cable handling, circuit breakers, and electrical compliance.
Top view and heating zone specifications for the EMPV-IDC12 model.
Top view and heating zone specifications for the EMPV-IDC24 model.
Top view and heating zone specifications for the EMPV-IDC30 model.
Top view and heating zone specifications for the EMPV-IDC36 model.
Top view and heating zone specifications for the EMPV-IDCF9 model.
Diagram and labels for the EMPV-IDC12 control panel.
Diagram and labels for the EMPV-IDC24 control panel.
Diagram and labels for the EMPV-IDC30 control panel.
Diagram and labels for the EMPV-IDC36 control panel.
Diagram and labels for the EMPV-IDCF9 control panel.
Explanation of the numbered functions on the control panels.
Instructions for initial preparation before first use.
How to correctly operate the touch-sensitive controls.
Methods to check if cookware is suitable for induction cooking.
List of materials not suitable for induction cooktops.
Instructions on how to place pans correctly on the cooking zones.
Advice on lifting pans to avoid scratching the glass surface.
Steps to turn on the cooktop and enter standby mode.
How to choose and prepare a cooking zone for use.
How to adjust the power level using controls.
What happens if no heat setting is chosen within a minute.
Steps to turn off individual cooking zones.
How to turn off the entire appliance.
Explanation of the residual heat warning symbol.
Steps to activate the high-power Boost function.
How to disable the Boost function and select a normal level.
Steps to activate the function to keep food warm.
How to disable the Keep Warm function.
How to temporarily stop and resume cooking.
Steps to combine two cooking zones into one large area.
How to disable the Flexi Area function.
How to activate the child lock feature.
How to deactivate the child lock feature.
Explanation of the residual heat warning symbol.
Table showing automatic shutdown times for different power levels.
Using the timer as a non-interrupting kitchen timer.
Instructions for setting the timer duration.
How to set the timer to turn off cooking zones.
What the display shows during the countdown.
Setting timers for several cooking zones simultaneously.
Steps to cancel an active timer.
Tips on reducing cooking times and saving energy.
Techniques for simmering and cooking rice.
Step-by-step guide to searing steak for optimal results.
Tips for preparing ingredients and cooking stir-fries.
Table mapping heat settings to cooking suitability.
Procedure for cleaning everyday dirt and spills on the glass.
Key points and warnings for cleaning the cooktop.
Methods for cleaning tough spills like melts and sugary residues.
How to clean spills on the touch control area.
Possible causes and solutions for a non-functional cooktop.
Troubleshooting for unresponsive touch controls.
Causes and solutions for glass scratches and pan noises.
Explanation of normal operational noises.
Reasons why pans might not heat up.
Troubleshooting unexpected cooktop shutdowns.
Meaning of error codes and recommended actions.
Detailed specifications for the EMPV-IDC12 model.
Detailed specifications for the EMPV-IDC24 model.
Detailed specifications for the EMPV-IDC30 model.
Detailed specifications for the EMPV-IDC36 model.
Detailed specifications for the EMPV-IDCF9 model.
Guidelines for cutting and preparing the work surface.
Requirement for heat-resistant work surface materials.
Tables detailing product and built-in dimensions for all models.
Ensuring adequate ventilation for the cooktop.
Required clearances from cupboards and other elements.
Checks for work surface squareness, levelness, and material.
Requirements for the main power isolating switch.
Ensuring the power cable is not accessible through cabinets.
Confirming adequate airflow to the cooktop base.
Ensuring a thermal barrier is installed if needed.
Instructions on positioning and fixing the cooktop brackets.
Emphasis on installation by qualified personnel only.
Prohibitions on mounting near cooling equipment or dishwashers.
Requirements for wall and work surface heat resistance.
Technical requirement for supply system impedance.
Information on compliance with the Waste Electrical and Electronic Equipment directive.
Instructions for correct disposal and recycling of the appliance.
To Next Page