EMPERO EMP.350 - User Manual

14 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

1

CUTTER MIXER

Kasap Tip Dik Buzdolapları

CONTENTS

A GENEREAL INFORMATION Page 2

A1 PRODUCT DESCRIPTION Page 3

A2 TECHNICAL INFORMATION Page 3

A3 TRANSPORTATION Page 4

A4 UNPACKING Page 4

B INSTALLATION Page 4

C SAFETY INSTRUCTIONS Page 5

D OPERATION Page 6

E CLEANING & MAINTENANCE Page 7

F TROUBLESHOOTING Page 8

G SPARE PART LIST- EXPLODING DRAWINGS Page 9

H ELECTRIC CIRCUIT SCHEMA Page 13

Table of Contents

Questions and Answers

P
Paul FreemanAug 11, 2025
What to do if my EMPERO Mixer is noisy?
- D
  Diane BishopAug 11, 2025
  There are several reasons why your EMPERO Mixer might be making excessive noise. First, check the blades to ensure they are properly attached to the shafts. Also, verify that there isn't any accumulated material in the tank. If hard materials are present in the dividing tank, stop the appliance and remove them. If the motor itself is noisy, immediately stop the mixer and contact an authorized service technician.
C
Christopher JonesAug 20, 2025
Why did my EMPERO Mixer suddenly stop?
- D
  daviskevinAug 20, 2025
  Your EMPERO Mixer may have stopped due to low voltage. Check the voltage to ensure it meets the required specifications. Another possible cause is overloading. If the appliance is overloaded, turn it off, remove some material from the bowl, and allow it to cool down before restarting.
C
Christine NewmanSep 1, 2025
How to troubleshoot an EMPERO Mixer that doesn’t operate?
- L
  Lisa RamirezSep 1, 2025
  If your EMPERO Mixer isn’t operating, begin by ensuring it is properly plugged into a functioning power outlet. Next, verify the electrical connections and voltage are correct. Finally, check the dividing tank’s lid to make sure it is securely in place.

EMPERO EMP.350 Specifications

General

Type	Analog
Phantom Power	Yes
USB Interface	No
Inputs - Other	2 x RCA
Outputs - Other	1 (headphones)
Aux Sends	1