Empi Active - Quick Reference Guide; Starting a Therapy Session

EMPI Active User Guide
EMPI Active User Guide
9
What You Should Have Received
You should have received everything shown below in Figure 1. If anything is missing,
contact your clinician or call Empi at 800.328.2536:
Included:
1. Empi
®
Active
™
Device
2. Package containing electrodes and/or specialized wrap
3. Battery charger
4. Carrying bag
5. This user guide: Managing Your Pain with Empi Active
5
4
3
2
1
Managing Your Pain with
1. Wash and dry the skin area where you will
apply the electrode or specialized wrap.
2. Connect a charged Empi Active
device to an electrode or specialized
wrap. Figure 2
3. Apply the electrode or specialized wrap
(with electrodes applied) to your skin.
4. Press
. Figure 3
The light will glow blue steadily for about
five seconds.
5. Press
until you feel the desired
intensity. Figure 4
The light will flash blue every 5 seconds to
indicate that the device is operating and
therapy is being delivered.
Quick Reference continued
When you are familiar with your
Empi Active device, the following
quick reference will be helpful.
For complete information, see
“Detailed Instructions,”
beginning on page 11.
Figure 2:
Connect Device to
Electrode or Specialized
Wrap
Figure 3:
Turn Device ON/Off
Figure 4: Increase Intensity
Start a Therapy Session
Important: Be sure your Empi Active
device is turned off (in this condition,
the light is off for more than 5 seconds)
before connecting it to an electrode or
specialized wrap.
13051_360372A.indd 9 6/7/11 9:00:16 PM