EasyManua.ls Logo

Empire Comfort Systems RH-65-5 - User Manual

Empire Comfort Systems RH-65-5
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
R-1923 Page 1
WARNING: If the information in this
manual is not followed exactly, a fire
or explosion may result causing prop-
erty damage, personal injury or loss
of life.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch;
do not use any phone in your build-
ing.
Immediately call your gas supplier
from a neighbor's phone. Follow
the gas supplier's instructions.
If you cannot reach your gas sup-
plier, call the fire department.
Installation and service must be per-
formed by a qualified installer, service
agency or the gas supplier.
INSTALLATION INSTRUCTIONS
AND
OWNER'S MANUAL
VENTED
VISUAL FLAME
ROOM HEATER
MODELS
RH-50-5
RH-65-5
EFFECTIVE DATE
AUGUST, 2000
WARNING: If not installed, operated
and maintained in accordance with the
manufacturer's instructions, this prod-
uct could expose you to substances in
fuel or from fuel combustion which can
cause death or serious illness.
Question and Answer IconNeed help?

Do you have a question about the Empire Comfort Systems RH-65-5 and is the answer not in the manual?

Summary

Installation Instructions and Owners Manual

Vented Visual Flame Room Heater Models

Details the specific models (RH-50-5, RH-65-5) of the vented visual flame room heater.

Critical Safety Warnings

Highlights crucial warnings about fire, explosion, injury, and loss of life if not followed.

Gas Leak Emergency Procedures

Provides immediate actions to take if a gas leak is detected.

Installer Guidance and Product Specifications

Installer Responsibilities

Outlines the installer's duties, including leaving manuals and owner interaction.

General Information and Warnings

Covers certification, design alterations, and safety precautions for servicing.

Installation Surface Requirements

Specifies requirements for installing the appliance on various floor surfaces.

Technical Specifications and Accessories

Lists key dimensions, input ratings, and available optional accessories.

LP-Gas Safety Information

LP-Gas Warning Odor Recognition

Explains the importance of the LP-gas odorant and actions during a leak.

Odor Fade and Detection Issues

Discusses circumstances where LP-gas odor may be diminished or absent.

Key Safety Points for LP-Gas Users

Offers essential reminders for recognizing and responding to gas leaks.

Installation Requirements and Gas Supply

Qualified Installing Agency Requirements

Defines the qualifications and responsibilities of an installing agency.

Room Heater Locating and Venting

Provides guidelines for proper placement and venting of the room heater.

Combustion Air and Ventilation

Details requirements for adequate air supply for combustion and ventilation.

Gas Supply and Pressure Testing

Covers gas line requirements, main gas cock installation, and pressure testing.

Technical Adjustments and Safety Systems

Manifold Pressure Checking

Explains how to check manifold pressure for natural gas and propane models.

Masonry Chimney Installation

Provides instructions for lining and installing a heater in a masonry chimney.

Vent Safety Shutoff System

Describes the vent safety switch function and troubleshooting.

Draft Diverter Configuration

Details how to reverse the draft diverter for vertical or horizontal venting.

Pilot and Burner Operation

Pilot Flame Adjustment and Characteristics

Guides on achieving the correct pilot flame and adjusting it for gas types.

Main Burner Flame Quality

Describes the proper main burner flame and factors affecting it.

Pilot and Burner Maintenance

Covers cleaning procedures for the pilot burner and main burner.

Primary Air Adjustment

Explains how to adjust primary air for optimal burner performance.

Lighting and Shut-Off Procedures

Safety Precautions Before Lighting

Emphasizes critical safety steps to perform before attempting to light the pilot.

Pilot Lighting Instructions

Step-by-step guide for lighting the pilot using the built-in ignitor or a match.

Turning Off Gas to Appliance

Provides instructions on how to safely turn off the gas supply to the appliance.

Service and Maintenance Suggestions

Troubleshooting Pilot Lighting Issues

Addresses common problems with pilot ignition and their causes.

Troubleshooting Pilot Outage

Identifies reasons for pilot flame going out after lighting.

Troubleshooting Burner Flame Issues

Covers causes and corrections for yellow or noisy main burner flames.

Troubleshooting Inoperative Blower

Diagnoses issues related to the blower not functioning correctly.

Ordering Replacement Parts

Procedure for Ordering Parts

Details the process for ordering replacement parts, including required information.

Optional Blower Installation

Installing the Optional Blower Unit

Step-by-step instructions for attaching the optional blower accessory.

Blower Wiring and Maintenance

Blower Wiring Harness Assembly

Provides steps for reassembling the blower wiring harness if disassembled.

Fan Control Operation and Wiring

Explains the function of the automatic fan control and its wiring diagram.

Blower Cleaning and Oiling

Guides on routine cleaning and lubrication of the blower motor.

Empire Comfort Systems RH-65-5 Specifications

General IconGeneral
ModelRH-65-5
CategoryHeater
BrandEmpire Comfort Systems
Fuel TypeNatural Gas or Propane
BTU Input65, 000 BTU
Efficiency80%

Related product manuals