Empire eLG3D - User Manual

9 pages

Save Page as PDF

To Next Page

Cat. No. / No de cat.

eLG3D

3 POINT LASER

LASER A 3 POINTS

LÁSER DE 3 PUNTOS

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Main Page

Questions and Answers

W
williamsonsamuelJul 27, 2025
What to do if my Empire Laser Level does not turn on?
- M
  Madison WilsonJul 27, 2025
  If your Empire Laser Level does not turn on, first, make sure that the batteries are correctly inserted, paying attention to the +/- polarity markings inside the battery compartment. If they are correctly installed, try replacing them with a new set, as the current batteries may be depleted. Also, the tool's internal temperature might be outside of its operating range. If the level has been stored in very hot or cold conditions, allow it to sit at room temperature for at least 2 hours before attempting to turn it on.

Summary

General Safety Warnings

Laser Safety

Instructions for safe use of the laser beam and avoiding injury.

Work Area Safety

Guidelines for maintaining a safe work environment during operation.

Personal Safety

Precautions for safe handling and operation of the tool.

Operational Functions

Laser Operation

Describes how to operate the laser beam feature of the device.

Battery Operation

Information regarding battery usage and performance characteristics.

Battery and Care

Battery Installation

Step-by-step instructions for correctly installing batteries.

Low Battery Indication

How to identify and respond to the low battery warning signals.

Using the Laser Level

Self-Leveling Functionality

Details on the automatic self-leveling feature and its limits.

Troubleshooting

Accuracy Field Check

Procedure to verify the accuracy of the laser leveling.

Vertical Leveling Accuracy

Procedure for Accuracy Check

Step-by-step guide to ensure accurate vertical leveling.

Maintenance and Repairs

Maintaining Laser Level

Tips for keeping the laser level in good working condition.

Cleaning

Instructions on how to properly clean the laser level.

Cleaning the Lenses

Specific methods for cleaning the optical lenses.

Repairs

Information on obtaining repair services for the tool.

Accessories and Service

Service - United States

Contact information for customer support and service in the US.

Empire eLG3D Specifications

General

Laser Wavelength	635 nm
Leveling Range	±4°
Self-Leveling	Yes
IP Rating	IP54
Number of Beams	3
Battery Type	AA
Visibility Range	30 m
Power Source	Battery
Working Range	30 m
Laser Diode	635 nm
Outdoor Use	Yes

Related product manuals

Empire e100

8 pages