EMPORIA Vue User Manual

Step 7 (continued): Connect the
wire harness
The voltage sensing wire harness will be
connected differently depending on the
number of Main CTs installed in Step 5 as
well as whether or not there are an adequate
number of empty breakers. Go to the step
below based on the system. If you’re unsure,
contact Emporia Support and we’ll help you
through it.
Step 7(a) Common in N. American homes
Step 7(b) Common in N. American homes
Step 7(c)
Common in European 3-phase homes
Common in N. American Commercial systems
Uncommon in N. American homes
Step 7(d)
Common in European 3-phase homes
Common in N. American Commercial systems
Uncommon in N. American homes
Step 7(e)
Common in European 1-phase homes
Uncommon in N. American homes
Step 7(f)
Common in European 1-phase homes
Uncommon in N. American homes
Two empty breakers
Two Main CTs
No empty breaker
Two Main CTs
Three empty breakers
Three Main CTs
No empty breaker
Three Main CTs
One empty breaker
One Main CT
No empty breaker
One Main CT













EMPORIA Vue Specifications

General

Type	Energy Monitor
Communication	Wi-Fi
Connectivity	Wi-Fi
Voltage	120/240V
Current Sensors	50A/200A
Data Logging	Yes
Real-time Monitoring	Yes
Historical Data	Yes
Frequency	60Hz
Display	None (App-based)
Maximum Amperage	200A
Power Source	Hardwired (120-240V AC)