Need help?Do you have a question about the Empress Effects compressor and is the answer not in the manual?
Explains the ratio knob, its settings (2:1, 4:1, 10:1), and its impact on gain reduction.
Details how the input knob sets the signal level entering the circuit, affecting compression.
Describes the attack knob's function, controlling reaction speed to incoming signals.
Explains the sidechain loop for signal alteration and its accepted plug type.
Details the release knob's function, determining how quickly the compressor returns to initial level.
Describes the 10-segment LED meter for input gain, gain reduction, or both.
Explains the output knob's function in setting the overall output level.
Details the mix knob for blending dry and compressed signals for parallel compression.
Explains the function of the bypass stompswitch and its LED indicator.
Suggests a setting for consistency and sustain while retaining dynamics.
Provides a setting for achieving a compressed country sound.
Further explanation of the sidechain connector loop and its use with bass guitar.
Explains the 10-segment LED meter showing input gain, gain reduction, or both.
General| Type | Analog Compressor |
|---|---|
| Power Supply | 9V DC |
| True Bypass | Yes |
| Input Impedance | 1 MΩ |
| Bypass | True Bypass |
| Technology | VCA |
| Power Requirements | 9V DC |
To Next Page