©2018 EMS Ltd. All rights reserved. Page 5 of 12 MK193 Iss6 30/10/2018 AJM
Full alarm received: When a full alarm is received with the key in the clear position, the display
will be as shown:
In the example shown transmitter number 7 has generated the alarm. The text on your system may
vary as transmitters can be allocated names, in which case the transmitter name and not its
number will be displayed.
Local alarm received: When a local alarm is received with the key in the clear position, the
display will be as shown:
In the example shown transmitter number 7 has generated the alarm. The text on your system may
vary as transmitters can be allocated names, in which case the transmitter name and not its
number will be displayed.
If more than one event has been logged by the receiver, the number next to ‘Item’ will be
greater than ‘001’. Events in the ‘Item’ log can be viewed by using the and buttons. The
‘Item’ log is cleared when the key is turned to the reset position.
Clearing an Alarm: When an alarm activation has occurred the display can be cleared by
inserting the key, turning it to the ‘RESET’ position and back to the ‘CLEAR’ position.
Internal Sounders: The Iris+ receiver makes three distinctive types of sound, a high pitched
sound which we will call sounder 1, a slightly lower pitch sound which will be known as
sounder 2 and both sounder 1 and 2 alternating at approximately half second intervals which
will be known as sounder 3. These sounders are programmable and will be set up when the
system is installed. If the sounders on your system do not function in the way described
overleaf, then your system has been congured with one or more of the sounder functions
disabled. To change the sounder conguration, contact your installer who will be able to carry
out the re-conguration.
Item : 001 – At 11:25
Alarm : Handpush 007
^^^^^^^^^^^^^^^^^^
*HUA Alarm * Time
Item : 001 – At 11:25
Local : Handpush 007
^^^^^^^^^^^^^^^^^^
*HUA Local * Time
To Next Page
Loading...
Need help?
General