EMS SDROLLXL - Step 7: U-Shaped Pipe and Lower Board Assembly; Step 8: Final Table Leg and Lower Board Connection

Assembly Instructions
5
© 2021. EMS Mind Reader, LLC. All Rights Reserved.
Step 7: Screw two Wheels (H) into the U-
Shaped Pipe (6) using the Wrench (J). Then,
connect the U-Shaped Pipe (6) to the Lower
Board (10) with two M5x50 Pointed-End Screws
(A) using the Dual-Purpose Screwdriver (K).
J
H
Step 8: Connect the Table Leg (1) and the Lower
Board (10) using M5x60 Pointed-End Screws (F)
using the Dual-Purpose Screwdriver (K). Make
sure the product is stable.
F
F
*Do not tighten screws until assembly is complete*