Emtek Keypad Deadbolt Locksets - How to Use; Unlock Procedure; Lock Procedure

9
Your Emtek lock is shipped with two 4-digit user codes and one 6-digit
programming code. These codes are randomly generated at the factory.
(Turn to next page for Programming Instructions.)
To Unlock:
1. Enter 4-digit user codes.
(See sticker located on the inside
trim plate or on page 11).
2. Rotate Thumbturn.
To Lock:
1. Press EMTEK key or enter a valid
4-digit user code.
2. Rotate Thumbturn.
Your Lock is Ready to Use
How to Use