Do you have a question about the Emulex LightPulse LPe12000 and is the answer not in the manual?
Model | LPe12000 |
---|---|
Device Type | Host Bus Adapter |
Form Factor | Low Profile |
Interface | Fibre Channel |
Ports | Single Port |
Fibre Channel | Yes |
Max Frame Size | 2112 bytes |
Operating Temperature | 0°C to 55°C |
Storage Temperature | -40°C to 70°C |
OS Required | Windows, Linux, VMware |
Humidity | 5% to 95% non-condensing |
Streamlined installation, management, and industry-leading virtualization support for enterprise and virtual server environments.
Enterprise-class management application for centralized management of all Emulex adapters.
OneCommand Manager plug-in enables comprehensive control of Fibre Channel HBAs and network connectivity.
Provides superior performance, seamless integration, and supports IT server consolidation and energy conservation.
Supports MSI-X, 8GFC/4GFC/2GFC, NPIV, Virtual Fabric, FC-SP authentication, and long wave optics.
Complies with ANSI Fibre Channel standards and PCI Express base specifications.
Single-port (LPe12000) or dual-port (LPe12002) 8GFC link speeds, automatically detected.
Comprehensive support for Windows Server, Linux, Solaris, VMware vSphere, and Windows Hyper-V.
Supports PowerPC, SPARC, x86, x64, and Intel Itanium 64-bit processor families.
Data rates 2.125, 4.25, and 8.5GFC auto-detected. Short wave lasers with LC connector.
Short, low profile MD2 form factor card measuring 167.64mm x 68.91mm.
Operates with +3.3, +12 Volts, with temperature range 0-55° C and humidity 5-95% non-condensing.
Includes North America (FCC Class A, UL/CSA), Europe (CE Mark, EU RoHS), Japan (VCCI Class A), etc.
Doubling Fibre Channel link rate to 8GFC and enhanced virtualization capabilities.
End-to-end data protection with hardware parity, CRC, ECC, and other error checking.
Features Universal Boot, Boot from SAN, real-time event logging, beaconing, and environmental monitoring.
Centralized discovery, monitoring, reporting, and administration via GUI, CLI, or web browser.