EMX MAX PRO Series Instruction Manual

EMX Industries, Inc. Tech support: 216-834-0761 1/5
WEL-200_Rev2.2_080619 technical@emxinc.com
WEL-200
Wireless Edge Link
Instruction Manual
The WEL-200 is a complete wireless solution for interfacing sensing edges to gate and door operators, while
ensuring compliance with UL325 monitoring standards. Each receiver can connect with up to
four transmitters with separate relay and pulse outputs for open and close edge functionality.
Each transmitter can run for up to two years on two AA lithium batteries. With enhanced diagnostic
features, installation and maintenance for the WEL-200 is easy and reliable. Feedback is provided for all
fault modes, including edge open, short conditions, low battery and failed transmitters.
Ordering Information
• WEL-200K Wireless edge link kit, includes WEL-200R, WEL-200T, 2 cable grip inserts and
2 AA lithium batteries
• WEL-200R Wireless edge link receiver
• WEL -200T Wireless edge link transmitter
Specifications
Receiver (WEL-200R)
Transmitter (WEL-200T)
Operating Range
200 ft (line of sight)
Operating Frequency
915 MHz
Response Time
100 ms
Operating Temperature
-40° to 140°F (-40 to 60°C)
Power
12-24 VDC/AC
2 AA lithium batteries
~ 2 year life
Current Draw
50 mA
N/A
Surge Protection
Thermal fuse, MOV
Thermal fuse
Outputs
300 Hz pulsed, relay, or relay with
selectable 10K ohm resistor across
normally open contact
N/A
Dimensions
5.5” (140 mm) x 1.3” (34 mm)
x 3.5” (90 mm)
7” (180 mm) x 1.3” (32 mm)
x 2.6” (67 mm)
Connections
12 terminals
2 terminals
TM

EMX MAX PRO Series Specifications

General

Brand	EMX
Model	MAX PRO Series
Category	Receiver
Language	English