Features:
• Complies with 10BASE-T specifications of the IEEE802.3 standard
• Complies with 100BASE-TX specifications of the IEEE802.3u standard
• All ports are RJ-45 type for the 100Base-TX and 10Base-T connections
• Supports NWAY protocol for speed (auto sensing 10/100Mbps), and duplex mode
Half or Full auto-detection on all ports
• Supports MDI/MDI-X auto crossover
• Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
• Wire-speed packet filtering and forwarding rate
• Store-and-forward architecture filters fragment & CRC error packets
• Supports 1K MAC address entries
• 768KBytes buffer memory
• Supports extensive LED indicators for network diagnostics
• External power adapter
To Previous Page
Loading...
Need help?
General
