EasyManuals Logo

ENDA EDP 141 Manual

ENDA EDP 141
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1/3
SÝSEL MÜHENDÝSLÝK ELEKTRONÝK SAN. VE TÝC. A.Þ.
Yukarý Dudullu 34775 - ÜMRANÝYE/ÝSTANBUL-TÜRKÝYE
Tel : +90 216 499 46 64 Pbx. Fax : +90 216 365 74 01
url : www.enda.com.tr
Barbaros Cad. Kutup Sok. No:20
EDP141-E-05
* 34x77mm sized.
*
*
*
4 digits display.
Easy to use by front panel keypad.
Display scale can be adjusted between -1999 and 8000.
* Decimal point can be adjusted between 1. and 3. digits.
* 0-10V output with adjustable minimum and maximum values.
* ‘Soft on’ and ‘soft off’ properties can be selected.
* Parameter access protection on 3 levels.
* Having CE mark according to European Norms.
OUTPUT
0-10V output
M igitally adjustedaximum 10mA, d potentiometer output.
Resolution : 1/10000 V
Fluctuation : Maximum 30mV
Rise time from 0 to 10V is maximum 300ms
ENDA EDP 141 DIGITAL POTENTIOMETER
Supply Voltage
Order Code
230V AC +%10 -%20
EDP141
24V AC %10
9-30V DC SMPS module
EDP141-24AC
EDP141-24DC
Read this document carefully before using this device. The guarantee will be expired by
damaging of the device if you don't attend to the directions in the user manual. Also we don't
accept any compensations for personal injury, material damage or capital disadvantages.
Thank you for choosing ENDA EDP 141 potentiometer.
ENVIRONMENTAL CONDITIONS
Height
Max. 2000m
Ambient/storage temperature
Max. relative humidity
0 ... +50 °C/-25 ... +70°C (with no icing)
Rated pollution degree
TECHNICAL SPECIFICATIONS
80% up to 31 decreasing linearly 50% at 40 . °C °C
According to EN 60529 Front panel : IP60
Rear panel : IP20
Do not use the device in locations subject to corrosive and flammable gases.
Supply
230V AC +10% -20%, 50/60Hz or 24V AC ±10% 50/60Hz or 9-30V DC SMPS module
Power consumption
Max. 7VA
2.5mm² screw-terminal connections
Wiring
Date retention
EMC
Safety requirements
EN 61326-1: 1997, A1: 1998, A2: 2001 (Performance criterion B for the EMC standard)
EEPROM (Min. 10 years)
EN 61010-1: 2001 (pollution degree 2, overvoltage category II, measurement category I)
ELECTRICAL CHARACTERISTICS
HOUSING
Housing type
Suitable for flush-panel mounting according to DIN 43 700.
Dimensions
W77xH34xD70mm
Weight
Approx. 350g (after packing)
Enclosure material
Self extinguishing plastics
While cleaning the device, solvents (thinner, benzine, acid etc.) or corrosive materials must not be used.
SET
ENDA
EDP141
DIGITAL POTENTIOMETER

Other manuals for ENDA EDP 141

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ENDA EDP 141 and is the answer not in the manual?

ENDA EDP 141 Specifications

General IconGeneral
BrandENDA
ModelEDP 141
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals