Endless Pools Gecko - Endless Pools Product Low-Level Configurations

Gecko Heater-Controller Low-Level Programming Service Instruction
Page 2 of 2
Endless Pools D90001 0221
Low-Level
Endless Pools Product
LL1
• Endless Pools Spa Series (shipped after 11/1/2011) WITHOUT an Optional Gas Heater
LL2
• Endless Pools Steel Panel Product (Original EP, Performance EP, High Performance EP, Elite EP,
Dual Propulsion EP, WaterWell, Fastlane Pool, Fiberglass Pool) WITHOUT an optional gas heater
(Max Temp 92F).
• Swim Spa (shipped prior to 11/1/2011) WITHOUT an Optional Gas Heater (Max Temp 92F).
LL3
• Endless Pools Spa Series (shipped after 11/1/2011) WITH an Optional Gas Heater
LL4
• Endless Pools Steel Panel Product (Original EP, Performance EP, High Performance EP, WaterWell,
Fastlane Pool, Fiberglass Pool) WITH an optional gas heater (Max Temp 92F)
• Swim Spa (shipped prior to 11/1/2011) WITH an Optional Gas Heater (Max Temp 92F).
LL5
• Endless Pools Steel Panel Product (Original EP, Performance EP, High Performance EP, Elite EP,
Dual Propulsion EP, WaterWell, Fastlane Pool, Fiberglass Pool) WITHOUT an optional gas heater
(Max Temp 98F).
• Swim Spa (shipped prior to 11/1/2011) WITHOUT an Optional Gas Heater (Max Temp 98F).
LL6
• Endless Pools Steel Panel Product (Original EP, Performance EP, High Performance EP, Elite EP,
Dual Propulsion EP, WaterWell, Fastlane Pool, Fiberglass Pool) WITH an optional gas heater (Max
Temp 98F).
• Swim Spa (shipped prior to 11/1/2011) WITH an Optional Gas Heater (Max Temp 98F).
LL7
• SwimFit Pool (Max Temp 92F)
• 50Hz StreamLine Pool (Max Temp 92F)
•
LL8
• 60Hz StreamLine Pool (Max Temp 92F)