EasyManua.ls Logo

Enduro AS1210 User Manual

Enduro AS1210
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
enduro
®
AS1210 1
Ref: AS1210-UM-TKI-0412-Rev.A.
UK Automatic intelligent battery charger
DE Vollautomatisches intelligentes Ladegerät
FR Chargeur de batterie intelligent
NL Volautomatische intelligente acculader
10,6A RMS (7,0A DC)
Model: AS1210
Usermanual
Bedienungsanleitung
Manuel d’utilisateur
Gebruiksaanwijzing
Question and Answer IconNeed help?

Do you have a question about the Enduro AS1210 and is the answer not in the manual?

Enduro AS1210 Specifications

General IconGeneral
Output Voltage12V DC
Output Current10A
CoolingFan-cooled
Input Voltage100-240V AC
Battery TypeLead-Acid (AGM, GEL, Wet)
Charging MethodAutomatic
Charging StagesBulk, Absorption, Float
Protection FeaturesOvercharge, Short Circuit, Reverse Polarity

Summary

Introduction to Enduro AS1210 Charger

Intended Use of the Enduro AS1210

Enduro AS1210 Technical Specifications

Important Safety Instructions for Enduro AS1210

Electrical and Material Safety Warnings

Safety instructions regarding electrical hazards and material damage from misuse.

Working with Batteries Safely

Precautions for handling batteries, including acid contact and sparks.

Safe Battery Charger Operation

Guidelines for using the charger, connecting leads, and avoiding hazards.

Manufacturer Liability Disclaimer

Manufacturer not liable for damage from faulty assembly, alterations, or misuse.

Key Features of the Enduro AS1210

9-Stage Automatic Charging Technology

Explains the microprocessor-controlled 9-stage charging process for optimal battery life.

Temperature Compensation Feature

Automatic adjustment of charging current based on ambient temperature for protection.

Operation and Status Indicators

Polarity and Short-Circuit Protection

Protection against incorrect connection and accidental short circuits.

Battery Connection Options

Describes O-ring connectors for permanent fixation and crocodile clamps for flexible use.

Pre-Charging Battery Preparation

Instructions on checking battery cell levels and cleaning terminals before charging.

Connecting the Battery Charger

Detailed steps for connecting the positive and negative leads to the battery terminals.

Pulse Rescue for Dead Batteries

Explains the pulse charging mode for rescuing severely discharged batteries.

Understanding LED Indicators

Details the meaning of each LED indicator on the battery charger.

Charging Process and Abnormality Protection

Charging Stages and Estimated Times

Information on charging voltage, current, and estimated charge times to 80%.

Abnormality Protection Mechanisms

Lists abnormal conditions that trigger automatic shut-off and system reset.

Charging Completion and Battery Maintenance

Post-Charging Procedures

Steps to take after charging is complete, including lead disconnection and cell inspection.

Battery Cell Health Checks

How to identify and address faulty cells in a battery using a hydrometer.

Battery Care and Condition Testing

Terminal and Electrolyte Maintenance

Tips for maintaining battery terminals and electrolyte levels with distilled water.

Checking Battery Condition with Hydrometer

Using a hydrometer to check the specific gravity of battery electrolyte.

Environmental Protection and Product Warranty

Environmental Protection Guidelines

Guidelines for responsible disposal of electrical waste products.

Product Warranty Details

Details the 2-year warranty covering defects and conditions for voiding it.

Regulatory Compliance and Declarations

EU Declaration of Conformity

Statement confirming the appliance complies with relevant EU directives and standards.

Contact and Support Information

Supplier Contact Details

Provides contact information for EAL GmbH and Tradekar International BV.