Energetics WR 700 - Page 7

7
Assembly instruction
We recommend having 2 people to assemble the product.
Step 1
Attach Adjustable end cap（No.32、No.33）to Front stabilizer（No.2）. Then tighten with
2 Cross Screws M4*12 (No.96) using Spanner (No.99).
Step 2
Turn over the Slide Rail (No.8) and Seat (No.45).
Slide the Seat (No.45) onto the Slide Rail (No.8). Secure the Limit Pad (No.42) with 2 Flat
Cross Screws (No.75). Then attach the Rear Stabilizer (No.3) to the Slide Rail (No.8) with 4
Washers (No.83) and 4 Outer Hex Screws (No.71). Tighten with Spanner (No.99).