STEP B
Confirm that the displayed WiFi network is your 2.4GHz
WiFi network, enter your WiFi password and click "Confirm".
Confirm WiFi
Enter and Click
password
Confirm
Help: If you need information about 2.4GHz WiFi
networks, click the link to go to our Connect FAQs
on our website.
STEP 7
On the next screen, a QR Code will appear.
Position your camera to scanthis QRcode
on your phone.
Click "Continue" when you are ready.
Touchthe lens of the camera directly
against the QR code on your phone and
slowly move the camera away.
Beep!
Tip: If you don't hear the prompt,
try pairing using EZmode. Take a
look at troubleshooting on page 12.
Click
Heard a Prompt
Click
Once you hear an
audible prompt from
the camera, click the
"l Heard a Prompt"
button.
4
To Next Page
