Energizer ENX8K User Manual

Energizer ENX8K

11 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Made in China for:

Bright Manufacturing LLC.

Fort Lauderdale, FL 33309

© 2017 Energizer. Energizer and certain graphic designs are

trademarks of Energizer Brands, LLC and related subsidiaries

and are used under license by Bright Manufacturing, LLC. All

other brand names are trademarks of their respective owners.

Neither Bright Manufacturing, LLC. nor Energizer Brands, LLC

is affiliated with the respective owners of their trademarks.

ENX8K

30,000mWh LITHIUM-POLYMER

CAR JUMP STARTER

USER’S MANUAL

PLEASE READ THIS MANUAL CAREFULLY BEFORE OPERATION

Lithium Battery Disposal:

This product contains a lithium battery. A lithium battery should not be thrown

away in the trash. Please dispose of the battery at an authorized disposal or

recycle center. Check your local requirements for battery disposal/recycling in

your state.

Table of Contents

Questions and Answers:

J
joannabatesAug 4, 2025
What to do if Energizer ENX8K is blinking green but not starting the car?
- T
  Timothy BoydAug 4, 2025
  If the Energizer Jump starter is blinking green but not jump-starting the vehicle, it could mean that the clamps are not properly connected to the vehicle battery. Ensure that you reconnect the clamps securely. Another possibility is that the jump starter/charger voltage is lower than the vehicle battery voltage, indicating that the vehicle battery may already have enough charge to start the car.
B
brandon65Aug 17, 2025
Why is my Energizer ENX8K blinking red and not jump starting my car?
- C
  Cathy RyanAug 18, 2025
  If your Energizer Jump starter isn't jump starting your vehicle and the light is blinking red, it could be due to several reasons: * The jump starter's battery might not have enough charge. In this case, charge the jump starter fully. * The jumper cable clamps may not be correctly connected to the vehicle's battery. Ensure you reconnect the clamps to the correct battery terminals, checking that the jumper cable's LED turns green. * The jump starter might have overheated. Allow the jump starter to cool down to a suitable operating temperature before attempting to use it again.

Energizer ENX8K Specifications

General

Brand	Energizer
Model	ENX8K
Category	Jump starter
Language	English

Summary

Introduction

Important Safety Information

Read safety instructions and pay attention to caution and warning statements for safe operation.

Specifications

Physical Specifications

Provides dimensions and weight of the Energizer Jump Starter.

Safety Information

Proposition 65 Warning

Warning regarding chemicals known to cause cancer and birth defects in California.

Operating Instructions

Recharging the Jump Starter

Steps to recharge the jump starter using the AC charger and cable.

Trouble Shooting

Warnings

Risk of Explosive Gases

Cautionary advice regarding explosive gases from lead-acid batteries and safe handling.

Personal Precautions

Personal safety measures when working near lead-acid batteries, including protective gear and avoiding sparks.

Features

Warranty and Returns

Warranty Coverage and Service

Details what the limited warranty covers, what Bright Manufacturing will do, and how to get service.

Warranty Exclusions

Lists conditions and damages not covered by the limited warranty.

Return Procedure