To Next PageTo Next PageWhat to do if my Energy Star Air Cleaner unit does not work?
If the Energy Star Air Cleaner unit isn't working, first, ensure it's properly plugged in. Then, check the upper left port to make sure it's free of any packaging material. Finally, verify that the unit is receiving power from the house circuit breaker or fuse.
Why is the LED of my Energy Star EVO5 500 HRV integrated defrost control blinking amber?
If the LED of your integrated defrost control is blinking AMBER, there may be a problem with the damper system. Try resetting the unit by unplugging it for 30 seconds. The unit will attempt to reset the damper system every 30 minutes for a 5-hour period. If the problem persists after 5 hours, the unit will stop trying to reset the damper system.
How to fix error code E1 or E3 on Energy Star EVO5 500 HRV?
If you see error code E1 or E3 on the wall control screen of your Energy Star Air Cleaner, try resetting the unit by unplugging it for 30 seconds.
Why is the air too cold at the air supply grille of my Energy Star EVO5 500 HRV?
If the air feels too cold at the air supply grille of your Energy Star Air Cleaner during the cold season, check whether the exterior hood, especially the top grille, is blocked. You can also set the unit in AUTO or ECO mode or change the defrost cycle of the unit to PLUS.
Why is the LED of my Energy Star EVO5 500 HRV Air Cleaner integrated defrost control blinking green?
If the LED of the integrated defrost control on your Energy Star Air Cleaner is blinking green, try resetting the unit by unplugging it for 30 seconds. If this doesn't solve the problem, there may be an issue with the thermistor.
General| Brand | Energy Star |
|---|---|
| Model | EVO5 500 HRV |
| Category | Air Cleaner |
| Language | English |
