Need help?Do you have a question about the Energy Connoisseur ESW-M6 and is the answer not in the manual?
General| Woofer Size | 6.5 inches |
|---|---|
| Driver Size | 6.5 inches |
| Frequency Response | 35 Hz - 150 Hz |
| Enclosure Type | Bass Reflex |
| Type | Subwoofer |
| Inputs | Line level |
Warning to reduce risk of fire or electric shock by not exposing the apparatus to rain or moisture.
Emphasizes turning off all power before connecting and ensuring components are disconnected from AC to prevent damage.
Selects Power Mode (On or Auto) after break-in and power on for optimal system operation and energy saving.
Connect a single RCA cable from the receiver's 'Subwoofer/Pre-Amp Out' to the subwoofer's LINE IN/SUB IN.
Plug the subwoofer into an AC outlet (not receiver's) and switch the Main Power to On.
Directs users to the 'Final System Adjustments' section for tuning the subwoofer's performance.
Set Power Mode (On/Auto) after break-in. Unplug during extended non-use.
Match subwoofer volume to system volume for smooth frequency transition.
Adjust crossover frequency (90-120Hz for satellites, 70-90Hz for bookshelf, 40-70Hz for floorstanding). Use Bypass for receivers with bass management.
To Next Page
