Energy S8.2 User Manual

owners manual
PRINTED IN CANADA
7AI//ETV2SW
S8.2
Powered Subwoofer

Energy S8.2 Specifications

General

Enclosure Type	Bass Reflex
Auto On/Off	Yes
Type	Powered subwoofer
Woofer Size	8 inches
Inputs	Line-level RCA
Phase Switch	0/180 degrees

Summary

IMPORTANT SUBWOOFER SAFETY INSTRUCTIONS

INTRODUCTION

SUBWOOFER CONNECTION TO YOUR AUDIO/VIDEO SYSTEM

Using High Level Connections

Connects subwoofer to receiver/amplifier speaker outputs for audio.

Using the "Subwoofer Output" of an A/V Receiver or Processor

Connects subwoofer to A/V receiver/processor RCA output for audio.

Using An External Crossover

Connects subwoofer to external crossover or A/V receiver's advanced crossover.

SET UP CALIBRATION

SUBWOOFER FEATURES

Auto-On/Auto-Off Circuit

Automatically turns subwoofer on/off based on audio signal detection.

Clipping Protection Circuit

Prevents distorted sound by automatically adjusting input signal levels.

High Level Input and Output Terminals

Allows connection to A/V receiver/amplifier speaker outputs.

Low-Level RCA Input Jacks

Connects to A/V receiver/processor or external crossover mono output.

Power Switch

Turns the subwoofer's AC power on or off for extended periods.

SUBWOOFER OPERATING CONTROLS

BL - Subwoofer Level Control

Adjusts subwoofer output level to balance with main speakers.

LPF - Low Pass Filter Control

Adjusts high-frequency roll-off for bass blend with main speakers.

A/V - Audio/Video Switch

Selects equalizer mode for audio or enhanced video bass response.

ROOM ACOUSTICS & SUBWOOFER PLACEMENT

WARRANTY

LIMITED WARRANTY POLICY IN THE UNITED STATES AND CANADA

Outlines warranty terms for US and Canadian purchasers.

WARRANTY SERVICE

Provides contact information and procedures for obtaining service.