Need help?Do you have a question about the ENERMAX PRO82PLUS II and is the answer not in the manual?
General| Efficiency Rating | 80 PLUS Bronze |
|---|---|
| Efficiency | Up to 85% |
| Modularity | Non-Modular |
| Form Factor | ATX |
| Input Voltage | 100-240V |
| Input Frequency | 50-60 Hz |
| Cooling Fan | 120mm |
| SATA Connectors | 6 |
| Molex Connectors | 4 |
| Input Current | 10A |
| MTBF | 100, 000 hours |
| Dimensions | 150mm x 86mm x 140mm |
| EPS Connectors | 1 x 4+4-Pin |
| Protection | OVP, UVP, OPP, SCP |
| +12V Rails | Single Rail |
| Connectors | 6 x SATA, 4 x Molex |
| Output | +3.3V@24A, +5V@15A, +12V@43A, -12V@0.5A, +5VSB@2.5A |
Connects the PSU to the motherboard for ATX power.
Provides power to the CPU, supporting 4-pin or 8-pin configurations.
Powers graphics cards with 6-pin or 8-pin connectors.
Supplies power to SATA storage devices like HDDs and SSDs.
Connects to older peripherals like case fans or optical drives.
Powers the floppy disk drive connector.
Details the DC voltage outputs for various rails.
Likely for fan RPM monitoring or control.
Likely for front panel audio connector.
Steps to physically install the power supply unit into the computer case.
Instructions for connecting all necessary power cables to components.
Location and function of the main power switch.
Description of the fan control feature for quiet operation.
To Next Page
